{"product_id":"eversolo-amp-f8","title":"Eversolo AMP-F8","description":"\u003ch1\u003eClass AB stereo power amplifier\u003c\/h1\u003e\n\u003cp\u003eThe Eversolo AMP-F8 is the brand's first dedicated power amplifier, built to give demanding loudspeakers a comfortable power reserve. It delivers 180W RMS into 8Ω and 280W RMS into 4Ω in stereo, and can be switched to bridged mono mode to reach 500W RMS into 8Ω. A classic analog amplification foundation, designed to complement a high-quality digital source.\u003c\/p\u003e\n\n\u003ch2\u003eLinear power supply and output stage\u003c\/h2\u003e\n\u003cp\u003eThe AMP-F8 is built around a custom 800W toroidal linear transformer and three pairs of precision MOSFETs per output channel. This sizing translates into a damping factor above 400 at 8Ω, ensuring firm control over bass drivers, and into clean measurements: THD+N of 0.003% at 1kHz, a signal-to-noise ratio of 115dB or higher (A-weighted), and crosstalk below -95dB at 180W into 8Ω. Frequency response spans 10Hz to 30kHz (±0.5dB at 1W\/8Ω).\u003c\/p\u003e\n\n\u003ch2\u003eStereo or bridged mono\u003c\/h2\u003e\n\u003cp\u003eUsed in stereo, the AMP-F8 powers a pair of speakers with 180W RMS\/8Ω or 280W RMS\/4Ω. Clearly labelled bridge-mode terminals on the rear panel let you switch it to mono to deliver up to 500W RMS into 8Ω — enough to drive large, less sensitive floorstanders, or to build a monoblock pair by combining two AMP-F8 units. This keeps the system open to future upgrades without undermining the initial investment.\u003c\/p\u003e\n\n\u003ch2\u003eConnectivity and integration\u003c\/h2\u003e\n\u003cp\u003eThe amplifier accepts one balanced XLR input and one unbalanced RCA input, both with a 10kΩ input impedance. Gain is switchable to match your preamplifier or source's output level: 5.2V\/23dB or 2.6V\/29dB via XLR, 2.65V\/23dB or 1.3V\/29dB via RCA. A 12V trigger input and output allow you to manage power-on sequencing across the rest of the system, cascading with other components in the chain.\u003c\/p\u003e\n\n\u003ch2\u003eAn amplification building block for the Eversolo ecosystem\u003c\/h2\u003e\n\u003cp\u003eEversolo made its name with streamers and DACs (DMP-A6, DMP-A8, T8, T10). The AMP-F8 is the logical next step on the amplification side, rounding out a coherent hi-fi chain built around an Eversolo source. It was unveiled at HIGH END Vienna 2026 alongside the rest of the new lineup: the T10 streaming transport, the DMP-A8 Gen 2, the DAC-R8 R2R DAC, the AMP-F6 (Class D\/GaN), the SA200 all-in-one streaming amplifier, and the C10 precision master clock.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Class AB stereo power amplifier\u003c\/li\u003e\n\u003cli\u003eOutput power: 180W RMS into 8Ω \/ 280W RMS into 4Ω (stereo)\u003c\/li\u003e\n\u003cli\u003eBridged mono output: up to 500W RMS into 8Ω\u003c\/li\u003e\n\u003cli\u003ePower supply: custom 800W toroidal linear transformer\u003c\/li\u003e\n\u003cli\u003eOutput stage: 3 pairs of precision MOSFETs\u003c\/li\u003e\n\u003cli\u003eTHD+N: 0.003% at 1kHz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: ≥115dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003eDamping factor: \u0026gt;400 at 8Ω\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10Hz–30kHz (±0.5dB at 1W\/8Ω)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: \u0026lt;-95dB at 180W into 8Ω\u003c\/li\u003e\n\u003cli\u003eInputs: 1x balanced XLR, 1x unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10kΩ (XLR and RCA)\u003c\/li\u003e\n\u003cli\u003eSwitchable gain (XLR): 5.2V\/23dB or 2.6V\/29dB\u003c\/li\u003e\n\u003cli\u003eSwitchable gain (RCA): 2.65V\/23dB or 1.3V\/29dB\u003c\/li\u003e\n\u003cli\u003e12V trigger: input and output (power-on sequencing)\u003c\/li\u003e\n\u003cli\u003eBridge mode: dedicated terminals on the rear panel\u003c\/li\u003e\n\u003cli\u003eMains power: 100–120V \/ 220–240V\u003c\/li\u003e\n\u003cli\u003eMax consumption: 1200W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×D×H): 265 x 388 x 119mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 15.9kg\u003c\/li\u003e\n\u003cli\u003eIncluded accessories: power cable, trigger cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eversolo","offers":[{"title":"Default Title","offer_id":54715677540675,"sku":"EVERSOLOAMPF8","price":1799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/5615\/5715\/files\/1_24364f33-b603-403d-83a2-7349fa69f8c3.png?v=1786369017","url":"https:\/\/coolkidsaudio.com\/en\/products\/eversolo-amp-f8","provider":"Cool Kids Audio","version":"1.0","type":"link"}