{"product_id":"eversolo-c10","title":"Eversolo C10","description":"\u003ch1\u003e10 MHz master clock with SC-cut OCXO\u003c\/h1\u003e\n\n\u003cp\u003eThe Eversolo C10 is an external master clock for digital hi-fi systems and studio installations. It distributes a single time reference to four compatible devices, keeping them locked to the same timing base. It is aimed at users whose system includes several digital links \u0026mdash; streamer, network transport, CD transport, DAC \u0026mdash; fitted with an external clock input.\u003c\/p\u003e\n\n\u003ch2\u003eSC-cut OCXO oscillator\u003c\/h2\u003e\n\n\u003cp\u003eThe C10 is built around an ultra-low-noise 10 MHz OCXO with an SC-cut crystal. Factory frequency deviation is below \u0026plusmn;0.01 ppm at 10 MHz \/ 25 \u0026deg;C, temperature stability stays under 0.003 ppm from \u0026minus;20 \u0026deg;C to +60 \u0026deg;C, and quoted ageing is below 0.002 ppm per day. Short-term stability is specified at under 9 \u0026times; 10\u0026#8315;\u0026sup1;\u0026sup3; at \u0026tau; = 1 s, with a 5-minute warm-up at 25 \u0026deg;C.\u003c\/p\u003e\n\n\u003cp\u003ePhase noise is quoted at \u0026le; \u0026minus;115 dBc\/Hz at 1 Hz, \u0026le; \u0026minus;129 dBc\/Hz at 10 Hz, \u0026le; \u0026minus;139 dBc\/Hz at 100 Hz and \u0026le; \u0026minus;145 dBc\/Hz at 1 kHz, with a noise floor of \u0026le; \u0026minus;170 dBc\/Hz. That 10 MHz base feeds a high-precision PLL and Eversolo's proprietary Reference Timing Engine (RTE), whose design goal is to reduce the parasitic effects of jitter through the digital chain. Each clock module carries a unique serial number and is calibrated at the factory; recalibration remains available through an authorised dealer.\u003c\/p\u003e\n\n\u003ch2\u003eFour buffered BNC outputs\u003c\/h2\u003e\n\n\u003cp\u003eThe C10 has four BNC outputs, each with its own buffer, all derived from the same clock source: four devices can therefore be synchronised simultaneously to a common reference. Available frequencies cover 10, 25 and 100 MHz, the 44.1 kHz family (11.2896 \/ 22.5792 \/ 45.1584 MHz) and the 48 kHz family (12.288 \/ 24.576 \/ 49.152 MHz). The signal is a square wave at 1.8 Vrms into 50 \u0026Omega;.\u003c\/p\u003e\n\n\u003cp\u003eAn SMB 1PPS reference input allows long-term recalibration from a GNSS receiver, which is not supplied. A USB 2.0 port is reserved for firmware updates.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility: check before ordering\u003c\/h2\u003e\n\n\u003cp\u003eThe Eversolo devices explicitly confirmed as compatible are the T10 network transport, the DAC-Z10 and the DAC-R8. The C10 also works with any third-party streamer, CD transport or DAC fitted with an external clock input. One caveat, though: a BNC connector on a device is no guarantee of compatibility. Before buying, check your device's documentation for the expected clock frequency, signal level, input impedance and connector type. If you are unsure about a particular link in your chain, get in touch.\u003c\/p\u003e\n\n\u003cp\u003eWorth stating what the C10 does not do: it carries no music files and performs no digital-to-analogue conversion. It is purely a time reference, there to complete an existing system rather than replace any part of it.\u003c\/p\u003e\n\n\u003ch2\u003ePower supply, chassis and display\u003c\/h2\u003e\n\n\u003cp\u003ePower comes from a toroidal transformer, chosen by Eversolo to reduce magnetic leakage and mains noise. The unit accepts 100-240 V AC 50\/60 Hz with automatic voltage selection, drawing a maximum of 20 W and under 0.8 W on standby.\u003c\/p\u003e\n\n\u003cp\u003eThe chassis is aluminium alloy, measuring 365 \u0026times; 310 \u0026times; 88 mm (78 mm without feet) and weighing 5.85 kg net. The 8.8-inch IPS touchscreen displays warm-up, oscillator temperature, operating status and 1PPS calibration, across three successive phases: warm-up, stabilisation, then stable.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eType: external master clock for digital systems\u003c\/li\u003e\n\u003cli\u003eOscillator: 10 MHz OCXO, SC-cut crystal, ultra-low noise\u003c\/li\u003e\n\u003cli\u003eFactory frequency deviation: \u0026lt; \u0026plusmn;0.01 ppm at 10 MHz \/ 25 \u0026deg;C\u003c\/li\u003e\n\u003cli\u003eTemperature stability: \u0026lt; 0.003 ppm from \u0026minus;20 \u0026deg;C to +60 \u0026deg;C\u003c\/li\u003e\n\u003cli\u003eAgeing: \u0026lt; 0.002 ppm \/ day\u003c\/li\u003e\n\u003cli\u003eShort-term stability: \u0026lt; 9 \u0026times; 10\u0026#8315;\u0026sup1;\u0026sup3; at \u0026tau; = 1 s\u003c\/li\u003e\n\u003cli\u003eWarm-up time: 5 min at 25 \u0026deg;C\u003c\/li\u003e\n\u003cli\u003ePhase noise: \u0026le; \u0026minus;115 dBc\/Hz at 1 Hz, \u0026le; \u0026minus;129 dBc\/Hz at 10 Hz, \u0026le; \u0026minus;139 dBc\/Hz at 100 Hz, \u0026le; \u0026minus;145 dBc\/Hz at 1 kHz\u003c\/li\u003e\n\u003cli\u003eNoise floor: \u0026le; \u0026minus;170 dBc\/Hz\u003c\/li\u003e\n\u003cli\u003eProcessing: high-precision PLL plus proprietary Reference Timing Engine (RTE) fed by the 10 MHz base\u003c\/li\u003e\n\u003cli\u003eCalibration: clock module with unique serial number, factory calibrated, recalibration through authorised dealer\u003c\/li\u003e\n\u003cli\u003eOutputs: 4 \u0026times; BNC, independent buffer per output, all derived from the same source\u003c\/li\u003e\n\u003cli\u003eOutput frequencies: 10 \/ 25 \/ 100 MHz, 44.1 kHz family (11.2896 \/ 22.5792 \/ 45.1584 MHz), 48 kHz family (12.288 \/ 24.576 \/ 49.152 MHz)\u003c\/li\u003e\n\u003cli\u003eOutput signal: square wave, 1.8 Vrms, 50 \u0026Omega; impedance\u003c\/li\u003e\n\u003cli\u003eReference input: 1 \u0026times; SMB 1PPS for long-term recalibration via GNSS receiver (receiver not supplied)\u003c\/li\u003e\n\u003cli\u003eService port: 1 \u0026times; USB 2.0, reserved for firmware updates\u003c\/li\u003e\n\u003cli\u003eDevices that can be synchronised: up to 4 simultaneously from the same reference\u003c\/li\u003e\n\u003cli\u003eConfirmed Eversolo compatibility: T10 network transport, DAC-Z10, DAC-R8\u003c\/li\u003e\n\u003cli\u003eDisplay: 8.8-inch IPS touchscreen (warm-up, oscillator temperature, operating status, 1PPS calibration)\u003c\/li\u003e\n\u003cli\u003ePower supply: toroidal transformer, 100-240 V AC 50\/60 Hz, automatic voltage selection\u003c\/li\u003e\n\u003cli\u003eConsumption: \u0026le; 20 W max, \u0026le; 0.8 W on standby\u003c\/li\u003e\n\u003cli\u003eChassis: aluminium alloy\u003c\/li\u003e\n\u003cli\u003eDimensions: 365 \u0026times; 310 \u0026times; 88 mm (78 mm without feet)\u003c\/li\u003e\n\u003cli\u003eNet weight: 5.85 kg\u003c\/li\u003e\n\u003cli\u003eSupplied with: power cable, one 50 cm BNC cable, one 1 m BNC cable, manual, warranty card, cleaning cloth\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eversolo","offers":[{"title":"Default Title","offer_id":55048149238083,"sku":"EVERSOLOC10","price":1890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/5615\/5715\/files\/eversolo-c10-7164067.png?v=1794783372","url":"https:\/\/coolkidsaudio.com\/en\/products\/eversolo-c10","provider":"Cool Kids Audio","version":"1.0","type":"link"}