{"product_id":"eversolo-dac-r8","title":"Eversolo DAC-R8","description":"\u003ch1\u003eDesktop R2R DAC, preamplifier and headphone amplifier\u003c\/h1\u003e\n\n\u003cp\u003eThe DAC-R8 is the first Eversolo converter to drop the off-the-shelf DAC chip in favour of a conversion architecture developed in-house, built around discrete precision resistors. A single chassis holds that converter, a preamplifier with analogue R2R volume control and a 1 W headphone amplifier, alongside a full DSP stage and an in-house OCXO clock. It is designed to sit at the centre of a desktop or monitoring system, between your digital sources and a power amplifier or active speakers.\u003c\/p\u003e\n\n\u003ch2\u003eOriginR2R: conversion engineered by Eversolo\u003c\/h2\u003e\n\n\u003cp\u003eOriginR2R is a network of discrete precision resistors driven by an FPGA, which handles digital filtering and switching timing. Conversion is segmented into 5+20 bits: a 5-bit section covers the large steps of the signal, a 20-bit section the fine detail. The structure is fully differential, with the + and \u0026minus; paths separated from the very first resistor network, and the signal is buffered at the output by an OPA1612.\u003c\/p\u003e\n\n\u003cp\u003eDSD gets its own native 1-bit path, feeding the resistor network directly without any conversion to PCM \u0026mdash; though PCM and DSD do share the same network at the final stage. On the clock side, an in-house 10 MHz OCXO works alongside a PLL, and a 50 \u0026Omega; BNC input accepts an external 10 or 25 MHz clock, including the Eversolo C10 master clock.\u003c\/p\u003e\n\n\u003ch2\u003eAnalogue R2R volume and preamplifier duties\u003c\/h2\u003e\n\n\u003cp\u003eVolume control is a fully balanced analogue R2R network using precision resistors switched by relays: no digital attenuation anywhere in the chain, so resolution stays intact at any listening level. That lets the DAC-R8 drive a power amplifier or active speakers directly, with no preamplifier in between.\u003c\/p\u003e\n\n\u003cp\u003eTwo analogue inputs, a balanced stereo XLR and an unbalanced RCA, let you use it as a preamplifier for analogue sources. Manufacturer figures quote, on the 5 Vrms XLR output, THD+N of 0.000316 %, noise below 1.9 \u0026micro;Vrms and 130 dB A-weighted SNR; on the 2.5 Vrms RCA output, 0.000355 % THD+N and 127 dB SNR. These are Eversolo's own measurements and have not been independently verified.\u003c\/p\u003e\n\n\u003ch2\u003eFull DSP, controlled from a browser\u003c\/h2\u003e\n\n\u003cp\u003eOn-board processing covers a parametric EQ, a 20-band EQ, FIR filters, dynamics adjustment, per-channel delay, independent left\/right adjustment and stereo balance. Conversion offers three modes \u0026mdash; NOS without oversampling, OS at \u0026times;2, \u0026times;4 or \u0026times;8, and BEST \u0026mdash; plus six digital FIR filters, enough to tailor filtering behaviour to the material.\u003c\/p\u003e\n\n\u003cp\u003eAll of it is controlled from a web interface opened in a browser over the USB-B connection, with no driver and no software to install: nothing to deploy on a workstation. The Eversolo Control app and the supplied remote round out the controls, while the 5.2\" IPS touchscreen on the front panel shows VU meters, a spectrum analyser, active input, sample rate, conversion mode and volume, with a rotary knob dedicated to level.\u003c\/p\u003e\n\n\u003ch2\u003eConnectivity and system integration\u003c\/h2\u003e\n\n\u003cp\u003eThe asynchronous USB-B and the I\u0026sup2;S-over-HDMI input, with eight selectable pinout modes, reach 32-bit\/768 kHz PCM and accept DSD512. AES\/EBU and coaxial S\/PDIF, both galvanically isolated, along with Toslink optical, accept 32-bit\/192 kHz and DSD64 over DoP; an HDMI eARC\/ARC input takes TV sound in 24-bit\/192 kHz stereo. Bluetooth 5.4 runs on a Qualcomm QCC3095 module with aptX, aptX HD and aptX Adaptive. The DAC-R8 has neither Wi-Fi nor Ethernet: this is not a network player.\u003c\/p\u003e\n\n\u003cp\u003eOutputs: balanced XLR at 5 Vrms, unbalanced RCA at 2.5 Vrms and a 6.35 mm front-panel jack fed by its own drive circuit. The headphone amplifier offers three gain settings (2.5 \/ 5.5 \/ 7 Vrms) with automatic impedance detection, delivering 1 W into 16 and 32 \u0026Omega; and 160 mW into 300 \u0026Omega;, for a recommended range of 16 to 300 \u0026Omega;. A 12 V trigger output and a dedicated grounding terminal ease integration. The CNC-machined black aluminium chassis matches the dimensions and industrial style of the Eversolo T8 network transport, which it is designed to stack with; it joins the DAC Series alongside the DAC-Z10, which uses AK4191 and AK4499 chips instead.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eConversion architecture\u003c\/strong\u003e: OriginR2R, discrete precision resistor network (no off-the-shelf DAC chip), 5+20-bit segmentation, FPGA-driven (digital filtering and switching timing), fully differential structure (+ and \u0026minus; paths separated from the first network), dedicated native 1-bit DSD path feeding the network directly, OPA1612 analogue output buffer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClocking\u003c\/strong\u003e: in-house 10 MHz OCXO with PLL; external clock input on BNC, 10 MHz or 25 MHz, 50 \u0026Omega; (compatible with the Eversolo C10 master clock)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB-B\u003c\/strong\u003e: PCM 32-bit\/768 kHz, native DSD512\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eI\u0026sup2;S over HDMI\u003c\/strong\u003e: PCM 32-bit\/768 kHz, DSD512\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAES\/EBU\u003c\/strong\u003e: PCM 32-bit\/192 kHz, DSD64 over DoP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoaxial S\/PDIF\u003c\/strong\u003e: PCM 32-bit\/192 kHz, DSD64 over DoP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eToslink optical\u003c\/strong\u003e: PCM 32-bit\/192 kHz, DSD64 over DoP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHDMI eARC\/ARC\u003c\/strong\u003e: 24-bit\/192 kHz stereo\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs\u003c\/strong\u003e: 1\u0026times; asynchronous USB-B, 1\u0026times; I\u0026sup2;S over HDMI (8 selectable pinout modes), 1\u0026times; AES\/EBU (galvanically isolated), 1\u0026times; coaxial S\/PDIF (galvanically isolated), 1\u0026times; Toslink optical, 1\u0026times; HDMI eARC\/ARC, 1\u0026times; BNC external clock input, 1\u0026times; USB-A reserved for firmware updates\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWireless\u003c\/strong\u003e: Bluetooth 5.4, Qualcomm QCC3095 module, aptX \/ aptX HD \/ aptX Adaptive codecs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs\u003c\/strong\u003e: 1\u0026times; balanced stereo XLR, 1\u0026times; unbalanced stereo RCA (analogue preamplifier function)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs\u003c\/strong\u003e: 1\u0026times; balanced XLR 5 Vrms, 1\u0026times; unbalanced RCA 2.5 Vrms, 1\u0026times; 6.35 mm front-panel headphone jack with dedicated drive circuit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot provided\u003c\/strong\u003e: no 4.4 mm Pentaconn output, no 4-pin XLR, no Wi-Fi, no Ethernet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOther\u003c\/strong\u003e: 12 V trigger output, dedicated grounding terminal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone amplifier\u003c\/strong\u003e: 3 gain settings (low\/medium\/high) at 2.5 \/ 5.5 \/ 7 Vrms, automatic impedance detection; 1 W into 16 \u0026Omega;, 1 W into 32 \u0026Omega;, 160 mW into 300 \u0026Omega;; recommended impedance range 16 to 300 \u0026Omega;; THD+N 0.000287 % and SNR 127 dB at high gain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolume control\u003c\/strong\u003e: fully balanced analogue R2R, precision resistors switched by relays, no digital attenuation; can drive a power amplifier or active speakers directly\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConversion modes\u003c\/strong\u003e: NOS (non-oversampling), OS (\u0026times;2, \u0026times;4, \u0026times;8), BEST; 6 digital FIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP\u003c\/strong\u003e: parametric EQ, 20-band EQ, FIR filters, dynamics adjustment, per-channel delay, independent per-channel adjustment, stereo balance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControl\u003c\/strong\u003e: browser-based web interface over USB-B (no driver or software to install), Eversolo Control app, remote supplied\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer figures, XLR preamp output\u003c\/strong\u003e: 5 Vrms, THD+N 0.000316 %, noise \u0026lt; 1.9 \u0026micro;Vrms, SNR 130 dB A-weighted, dynamic range 130 dB, channel separation \u0026minus;142 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturer figures, RCA preamp output\u003c\/strong\u003e: 2.5 Vrms, THD+N 0.000355 %, noise \u0026lt; 1.6 \u0026micro;Vrms, SNR 127 dB, dynamic range 127 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response\u003c\/strong\u003e: 20 Hz\u0026ndash;20 kHz \u0026plusmn;0.25 dB in BEST mode\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e: 5.2\" IPS touchscreen (VU meters, spectrum analyser, active input, sample rate, conversion mode, volume), rotary volume knob\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChassis\u003c\/strong\u003e: CNC-machined aluminium, black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions and weight\u003c\/strong\u003e: 315 \u0026times; 230 \u0026times; 75 mm including feet (65 mm without feet), 4 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e: linear, custom O-core transformer, 100-240 V 50\/60 Hz, 32 W consumption\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupplied with\u003c\/strong\u003e: remote, power cable, trigger cable, manual\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: THD+N, SNR, dynamic range and separation figures are manufacturer measurements, not independently verified\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eversolo","offers":[{"title":"Default Title","offer_id":55048149205315,"sku":"EVERSOLODACR8","price":1290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/5615\/5715\/files\/eversolo-dac-r8-2231343.png?v=1794783373","url":"https:\/\/coolkidsaudio.com\/en\/products\/eversolo-dac-r8","provider":"Cool Kids Audio","version":"1.0","type":"link"}