Eversolo
Eversolo C10
Eversolo C10
In stock
Couldn't load pickup availability
10 MHz master clock with SC-cut OCXO
The Eversolo C10 is an external master clock for digital hi-fi systems and studio installations. It distributes a single time reference to four compatible devices, keeping them locked to the same timing base. It is aimed at users whose system includes several digital links — streamer, network transport, CD transport, DAC — fitted with an external clock input.
SC-cut OCXO oscillator
The C10 is built around an ultra-low-noise 10 MHz OCXO with an SC-cut crystal. Factory frequency deviation is below ±0.01 ppm at 10 MHz / 25 °C, temperature stability stays under 0.003 ppm from −20 °C to +60 °C, and quoted ageing is below 0.002 ppm per day. Short-term stability is specified at under 9 × 10⁻¹³ at τ = 1 s, with a 5-minute warm-up at 25 °C.
Phase noise is quoted at ≤ −115 dBc/Hz at 1 Hz, ≤ −129 dBc/Hz at 10 Hz, ≤ −139 dBc/Hz at 100 Hz and ≤ −145 dBc/Hz at 1 kHz, with a noise floor of ≤ −170 dBc/Hz. That 10 MHz base feeds a high-precision PLL and Eversolo's proprietary Reference Timing Engine (RTE), whose design goal is to reduce the parasitic effects of jitter through the digital chain. Each clock module carries a unique serial number and is calibrated at the factory; recalibration remains available through an authorised dealer.
Four buffered BNC outputs
The C10 has four BNC outputs, each with its own buffer, all derived from the same clock source: four devices can therefore be synchronised simultaneously to a common reference. Available frequencies cover 10, 25 and 100 MHz, the 44.1 kHz family (11.2896 / 22.5792 / 45.1584 MHz) and the 48 kHz family (12.288 / 24.576 / 49.152 MHz). The signal is a square wave at 1.8 Vrms into 50 Ω.
An SMB 1PPS reference input allows long-term recalibration from a GNSS receiver, which is not supplied. A USB 2.0 port is reserved for firmware updates.
Compatibility: check before ordering
The Eversolo devices explicitly confirmed as compatible are the T10 network transport, the DAC-Z10 and the DAC-R8. The C10 also works with any third-party streamer, CD transport or DAC fitted with an external clock input. One caveat, though: a BNC connector on a device is no guarantee of compatibility. Before buying, check your device's documentation for the expected clock frequency, signal level, input impedance and connector type. If you are unsure about a particular link in your chain, get in touch.
Worth stating what the C10 does not do: it carries no music files and performs no digital-to-analogue conversion. It is purely a time reference, there to complete an existing system rather than replace any part of it.
Power supply, chassis and display
Power comes from a toroidal transformer, chosen by Eversolo to reduce magnetic leakage and mains noise. The unit accepts 100-240 V AC 50/60 Hz with automatic voltage selection, drawing a maximum of 20 W and under 0.8 W on standby.
The chassis is aluminium alloy, measuring 365 × 310 × 88 mm (78 mm without feet) and weighing 5.85 kg net. The 8.8-inch IPS touchscreen displays warm-up, oscillator temperature, operating status and 1PPS calibration, across three successive phases: warm-up, stabilisation, then stable.
Specifications
- Type: external master clock for digital systems
- Oscillator: 10 MHz OCXO, SC-cut crystal, ultra-low noise
- Factory frequency deviation: < ±0.01 ppm at 10 MHz / 25 °C
- Temperature stability: < 0.003 ppm from −20 °C to +60 °C
- Ageing: < 0.002 ppm / day
- Short-term stability: < 9 × 10⁻¹³ at τ = 1 s
- Warm-up time: 5 min at 25 °C
- Phase noise: ≤ −115 dBc/Hz at 1 Hz, ≤ −129 dBc/Hz at 10 Hz, ≤ −139 dBc/Hz at 100 Hz, ≤ −145 dBc/Hz at 1 kHz
- Noise floor: ≤ −170 dBc/Hz
- Processing: high-precision PLL plus proprietary Reference Timing Engine (RTE) fed by the 10 MHz base
- Calibration: clock module with unique serial number, factory calibrated, recalibration through authorised dealer
- Outputs: 4 × BNC, independent buffer per output, all derived from the same source
- Output frequencies: 10 / 25 / 100 MHz, 44.1 kHz family (11.2896 / 22.5792 / 45.1584 MHz), 48 kHz family (12.288 / 24.576 / 49.152 MHz)
- Output signal: square wave, 1.8 Vrms, 50 Ω impedance
- Reference input: 1 × SMB 1PPS for long-term recalibration via GNSS receiver (receiver not supplied)
- Service port: 1 × USB 2.0, reserved for firmware updates
- Devices that can be synchronised: up to 4 simultaneously from the same reference
- Confirmed Eversolo compatibility: T10 network transport, DAC-Z10, DAC-R8
- Display: 8.8-inch IPS touchscreen (warm-up, oscillator temperature, operating status, 1PPS calibration)
- Power supply: toroidal transformer, 100-240 V AC 50/60 Hz, automatic voltage selection
- Consumption: ≤ 20 W max, ≤ 0.8 W on standby
- Chassis: aluminium alloy
- Dimensions: 365 × 310 × 88 mm (78 mm without feet)
- Net weight: 5.85 kg
- Supplied with: power cable, one 50 cm BNC cable, one 1 m BNC cable, manual, warranty card, cleaning cloth
